Part Number: MS9147-22

Alternate Part Number:
5306-00-220-2969

(No reviews yet) Write a Review
CONDITION:
NS
BOLT,MACHINE,
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.750 INCHES MINIMUM AND 0.810 INCHES MAXIMUM
FASTENER LENGTH1.500 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON W/HOLE
HEAD HEIGHT0.330 INCHES NOMINAL
WIDTH BETWEEN FLATS0.304 INCHES MINIMUM AND 0.313 INCHES MAXIMUM
EXTENDED WASHER DIAMETER0.430 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.060 INCHES MINIMUM AND 0.070 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.250 INCHES
GRIP LENGTH0.690 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH28
MINIMUM TENSILE STRENGTH125000 POUNDS PER SQUARE INCH
HARDNESS RATING26.0 ROCKWELL C MINIMUM OVERALL AND 32.0 ROCKWELL C MAXIMUM OVERALL
SURFACE FINISH32.0 MICROINCHES THREADS
SURFACE FINISH63.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH63.0 MICROINCHES GRIP
MATERIALSTEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 6322 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONAMS 2400 ASSN STD SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNF
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.