Part Number: MS9489-26

Alternate Part Number:
5306-01-354-9702

(No reviews yet) Write a Review
CONDITION:
NS
BOLT,MACHINE,
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.630 INCHES MINIMUM
FASTENER LENGTH0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.125 INCHES NOMINAL
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES
GRIP LENGTH1.060 INCHES MINIMUM AND 1.120 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH32
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.630 INCHES MINIMUM
FASTENER LENGTH0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.125 INCHES NOMINAL
WIDTH BETWEEN FLATS0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM
NOMINAL THREAD DIAMETER0.190 INCHES
GRIP LENGTH1.060 INCHES MINIMUM AND 1.120 INCHES MAXIMUM
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH32
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD32.0 MICROINCHES GRIP32.0 MICROINCHES THREADS
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.