Part Number: MS9565-16

(No reviews yet) Write a Review
CONDITION:
NS
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.630 INCHES MINIMUM AND 0.690 INCHES MAXIMUM
FASTENER LENGTH1.125 INCHES NOMINAL
HEAD STYLEDOUBLE HEXAGON W/HOLE
HEAD HEIGHT0.260 INCHES NOMINAL
WIDTH BETWEEN FLATS0.250 INCHES NOMINAL
EXTENDED WASHER DIAMETER0.375 INCHES NOMINAL
EXTENDED WASHER THICKNESS0.040 INCHES MINIMUM
HOLE DIAMETER0.047 INCHES NOMINAL
NOMINAL THREAD DIAMETER0.190 INCHES
GRIP LENGTH0.435 INCHES MINIMUM AND 0.495 INCHES MAXIMUM
HOLE QUANTITY4
HOLE TYPEDRILLED
FEATURES PROVIDEDFINISHED HEAD
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH130000 POUNDS PER SQUARE INCH
HARDNESS RATING24.0 ROCKWELL C MINIMUM OVERALL AND 35.0 ROCKWELL C MAXIMUM OVERALL
MINIMUM YIELD STRENGTH85000 POUNDS PER SQUARE INCH
HOLE CONFIGURATION STYLEDOUBLE HEXAGON LONGITUDINAL HOLE
SURFACE FINISH32.0 MICROINCHES BEARING SURFACE OF HEAD
SURFACE FINISH32.0 MICROINCHES GRIP
SURFACE FINISH32.0 MICROINCHES THREADS
MATERIALIRON ALLOY 660 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5731 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE.