BOLT,MACHINE,
| BARRY WRIGHT CORPORATION DBA VLIER DIV VLIER | 1226 |
| LAWRENCE ENGINEERING AND SUPPLY INC | 4348 |
| NOR-CAL SUPPLY CO.INC. | 7851 |
| AIR INDUSTRIES CO INC | 8938 |
| ACCURATE PRESCISION FASTENER CORP. | 28977 |
| QUALIFIED AIR COMPONENTS INC. | 30485 |
| F AND C SALES INC | 30902 |
| APCOM INC | 50568 |
| PLASTIC AND METAL PRODUCTS CORPORATION | 53606 |
| SPS TECHNOLOGIES, LLC | 56878 |
| FASTENER INNOVATION TECHNOLOGY, INC. | 58998 |
| COLLINS ENGINEERING CORP | 71563 |
| HI-SHEAR CORPORATION | 73197 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| SPS TECHNOLOGIES, LLC | 80539 |
| DURHAM AIRCRAFT SERVICE INC | 82172 |
| HUCK INTL INC | 97928 |
| KLX AEROSPACE SOLUTIONS II SAS | F7652 |
| C.M.P. | FB009 |
| LISI AEROSPACE CANADA CORP DIV HI SHEAR HOLDINGS INC | L4528 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.481 INCHES MINIMUM |
| FASTENER LENGTH | 1.793 INCHES NOMINAL |
| HEAD STYLE | HEXAGON |
| HEAD HEIGHT | 0.125 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| GRIP LENGTH | 1.312 INCHES NOMINAL |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD QUANTITY PER INCH | 32 |
| MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.578 INCHES NOMINAL FIRST HOLE |
| SPECIAL FEATURES | TENSILE STRENGTH AT ROOM TEMPERATURE |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNF |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.481 INCHES MINIMUM |
| FASTENER LENGTH | 1.793 INCHES NOMINAL |
| HEAD STYLE | HEXAGON |
| HEAD HEIGHT | 0.125 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.070 INCHES NOMINAL FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.190 INCHES |
| GRIP LENGTH | 1.312 INCHES NOMINAL |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD QUANTITY PER INCH | 32 |
| MINIMUM TENSILE STRENGTH | 140000 POUNDS PER SQUARE INCH |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.578 INCHES NOMINAL FIRST HOLE |
| SPECIAL FEATURES | TENSILE STRENGTH AT ROOM TEMPERATURE |
| MATERIAL | IRON ALLOY 660 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | PASSIVATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNF |
| An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. |
