BOLT,SHEAR,BOLT,SHEAR,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 0.391 INCHES MINIMUM |
FASTENER LENGTH | 3.141 INCHES NOMINAL |
HEAD STYLE | DISHED HEXAGON |
HEAD HEIGHT | 0.188 INCHES NOMINAL |
WIDTH BETWEEN FLATS | 0.553 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES NOMINAL FIRST HOLE |
NOMINAL THREAD DIAMETER | 0.375 INCHES |
GRIP LENGTH | 2.750 INCHES NOMINAL |
THREAD QUANTITY PER INCH | 24 |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.021 INCHES NOMINAL FIRST HOLE |
MATERIAL | STEEL COMP 4140 OVERALL OR STEEL COMP E4340 OVERALL OR STEEL COMP 6150 OVERALL OR STEEL COMP 8735 OVERALL OR STEEL COMP 8740 OVERALL OR STEEL COMP 4037 OVERALL |
MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5626 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-5000 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR MIL-S-8503 MIL SPEC 3RD MATERIAL RESPONSE OVERALL OR MIL-S-6098 MIL SPEC 4TH MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-8695 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC ALL TREATMENT RESPONSES OVERALL |
THREAD SERIES DESIGNATOR | UNF |
SPECIAL FEATURES | CAPACITOR 15; CONNECTOR 1; INTEGRATED CIRCUIT 23; PRINTED WIRING BOARD 1; RESISTOR 41; SEMICONDUCTOR DEVICE DIODE 18; TRANSFORMER 6; TRANSIPAD 6; TRANSISTOR 6 |