WASHER,FLAT,
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | SQUARE |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.090 INCHES NOMINAL |
| WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.060 IN. RADIUS ALL CORNERS,0.090 IN. RADIUS ONE SIDE |
| MATERIAL | STEEL COMP 1008 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1025 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698,TEMPER 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 5TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-7952 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-7952 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIFICATION/STANDARD DATA | 80205-NAS1401 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.193 INCHES MINIMUM AND 0.213 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | SQUARE |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.090 INCHES NOMINAL |
| WIDTH ACROSS FLATS | 0.430 INCHES MINIMUM AND 0.490 INCHES MAXIMUM |
| SPECIAL FEATURES | 0.060 IN. RADIUS ALL CORNERS,0.090 IN. RADIUS ONE SIDE |
| MATERIAL | STEEL COMP 1008 OVERALL OR STEEL COMP 1009 OVERALL OR STEEL COMP 1015 OVERALL OR STEEL COMP 1018 OVERALL OR STEEL COMP 1020 OVERALL OR STEEL COMP 1025 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-698,TEMPER 1/2 HARD FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 1ST MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 2ND MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 3RD MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 4TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER 1/2 HARD FED SPEC 5TH MATERIAL RESPONSE OVERALL OR QQ-S-698,TEMPER HARD FED SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-7952 MIL SPEC 5TH MATERIAL RESPONSE OVERALL OR MIL-S-7952 MIL SPEC 6TH MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TY 2,CL 3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| SPECIFICATION/STANDARD DATA | 80205-NAS1401 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
