Part Number: NAS147DH-96

(No reviews yet) Write a Review
CONDITION:
NS
HONEYWELL INTERNATIONAL INC.59364
ALLIED-SIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO ELECTRODYNAMICS DIV77068
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.188 INCHES NOMINAL
FASTENER LENGTH5.985 INCHES MINIMUM AND 6.015 INCHES MAXIMUM
HEAD STYLEBEVEL-CONICAL
HEAD DIAMETER0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT0.407 INCHES NOMINAL
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
INTERNAL DRIVE STYLEHEXAGON
NOMINAL THREAD DIAMETER0.437 INCHES
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
HOLE QUANTITY6
HOLE TYPEDRILLED
THREAD QUANTITY PER INCH20
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
MATERIALSTEEL COMP 3135 OVERALL AND STEEL COMP 3140 OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS147 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.188 INCHES NOMINAL
FASTENER LENGTH5.985 INCHES MINIMUM AND 6.015 INCHES MAXIMUM
HEAD STYLEBEVEL-CONICAL
HEAD DIAMETER0.740 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD HEIGHT0.407 INCHES NOMINAL
HOLE DIAMETER0.070 INCHES MINIMUM AND 0.075 INCHES MAXIMUM
INTERNAL DRIVE STYLEHEXAGON
NOMINAL THREAD DIAMETER0.437 INCHES
WIDTH ACROSS FLATS0.375 INCHES MINIMUM AND 0.378 INCHES MAXIMUM
HOLE QUANTITY6
HOLE TYPEDRILLED
THREAD QUANTITY PER INCH20
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HOLE CONFIGURATION STYLEROUND INTERNAL HEXAGON
MATERIALSTEEL COMP 3135 OVERALL AND STEEL COMP 3140 OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY2 CL2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS147 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 1 ( .19 IN.) (5 mm) or larger. It is designed with an internal socket or internal multiple spline for use with an internal driver. The head is beveled (conical) or cylindrical in shape. Items with cylindrical shaped heads must have an externally relieved body. A locking feature may be incorporated in the design of the head or threads. See also SCREW, CAP, SOCKET HEAD. Excludes SETSCREW; SCREW, SHOULDER; BOLT, SHOULDER; SCREW, EXTERNALLY RELIEVED BODY; BOLT, EXTERNALLY RELIEVED BODY; and SCREW, MACHINE.