Part Number: NAS1635-3-12

(No reviews yet) Write a Review
CONDITION:
NS
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS2A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.658 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
FASTENER LENGTH0.720 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
HEAD STYLEPAN
HEAD DIAMETER0.357 INCHES MINIMUM AND 0.373 INCHES MAXIMUM
HEAD HEIGHT0.122 INCHES MINIMUM AND 0.133 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
SCREW MATERIALSTEEL CORROSION RESISTING
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNF
SPECIFICATION/STANDARD DATA80205-NAS1635 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.