Part Number: NAS1801-3-30

Alternate Part Number:
5305-01-078-2901

(No reviews yet) Write a Review
CONDITION:
NS
SCREW,MACHINE,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH1.795 INCHES MINIMUM AND 1.874 INCHES MAXIMUM
FASTENER LENGTH1.859 INCHES MINIMUM AND 1.906 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.190 INCHES
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HARDNESS RATING36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
SCREW MATERIALSTEEL COMP E4340 OR STEEL COMP 8740
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE
SCREW SURFACE TREATMENTCADMIUM AND CHROMATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416 TY 2 CL 2 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS1801 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.