Part Number: NAS1802-08-11

Alternate Part Number:
5305-01-219-2719

(No reviews yet) Write a Review
CONDITION:
NS
SCREW,MACHINE,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.610 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
FASTENER LENGTH0.672 INCHES MINIMUM AND 0.719 INCHES MAXIMUM
HEAD STYLEHEXAGON
HEAD HEIGHT0.096 INCHES MINIMUM AND 0.110 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.243 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
NOMINAL THREAD DIAMETER0.164 INCHES
THREAD QUANTITY PER INCH32
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
SCREW MATERIALIRON ALLOY 660
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONAMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE
SCREW SURFACE TREATMENTPASSIVATE
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE
THREAD SERIES DESIGNATORUNJC
SPECIFICATION/STANDARD DATA80205-NAS1802 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
HEAD STYLEA1 HEXAGON
INTERNAL DRIVE STYLEB1 CROSS RECESS TYPE 1
PROPRIETARY CHARACTERISTICSMRCS
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD.