SCREW,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
THREAD CLASS | 3A |
THREAD DIRECTION | RIGHT-HAND |
THREAD LENGTH | 1.750 INCHES NOMINAL |
FASTENER LENGTH | 1.984 INCHES MINIMUM AND 2.031 INCHES MAXIMUM |
HEAD STYLE | HEXAGON |
HEAD HEIGHT | 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM |
WIDTH BETWEEN FLATS | 0.305 INCHES MINIMUM AND 0.314 INCHES MAXIMUM |
INTERNAL DRIVE STYLE | CROSS RECESS TYPE 1 |
NOMINAL THREAD DIAMETER | 0.190 INCHES |
THREAD QUANTITY PER INCH | 32 |
MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
SCREW MATERIAL | IRON ALLOY 660 |
SCREW MATERIAL DOCUMENT AND CLASSIFICATION | AMS5731 ASSN STD SINGLE MATERIAL RESPONSE OR AMS5737 ASSN STD SINGLE MATERIAL RESPONSE |
SCREW SURFACE TREATMENT | PASSIVATE |
SCREW SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE |
BEARING SURFACE OF HEAD SURFACE FINISH | 63.0 MICROINCHES |
SHANK SURFACE FINISH | 32.0 MICROINCHES |
THREAD SURFACE FINISH | 32.0 MICROINCHES |
THREAD SERIES DESIGNATOR | UNJF |
SPECIFICATION/STANDARD DATA | 80205-NAS1802 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
An externally threaded fastener whose threaded portion is of one nominal diameter, No ( . 6 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below No. 1 ( .19 in./5 mm). No. 1 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, CLEVIS; BOLT, EXTERNALLY RELIEVED BODY; SCREW, EXTERNALLY RELIEVED BODY; and SCREW, ASSEMBLED WASHER. See also, SCREW, INSTRUMENT; BOLT, MACHINE; BOLT, INTERNAL WRENCHING; and SCREW, CAP SOCKET HEAD. |