BOLT,
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.370 INCHES NOMINAL |
| FASTENER LENGTH | 1.558 INCHES NOMINAL |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.132 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.434 INCHES NOMINAL |
| GRIP DIAMETER | 0.2490 INCHES NOMINAL |
| SHANK UNTHREADED HOLE DIAMETER | 0.081 INCHES NOMINAL FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| GRIP LENGTH | 1.188 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.388 INCHES NOMINAL FIRST HOLE |
| MATERIAL | STEEL OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.370 INCHES NOMINAL |
| FASTENER LENGTH | 1.558 INCHES NOMINAL |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.132 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.434 INCHES NOMINAL |
| GRIP DIAMETER | 0.2490 INCHES NOMINAL |
| SHANK UNTHREADED HOLE DIAMETER | 0.081 INCHES NOMINAL FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| GRIP LENGTH | 1.188 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 28 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.388 INCHES NOMINAL FIRST HOLE |
| MATERIAL | STEEL OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6204 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
