BOLT,
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.413 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| FASTENER LENGTH | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM FIRST SHOULDER |
| SHOULDER LENGTH | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM FIRST SHOULDER |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MINIMUM OVERALL |
| SHOULDER SHAPE | ROUND FIRST SHOULDER |
| MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| HEAD STYLE | C3 DISHED HEXAGON |
| SHOULDER DIAMETER | 0.3266 INCHES MINIMUM FIRST SHOULDER AND 0.3276 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.490 INCHES MINIMUM FIRST SHOULDER AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MINIMUM |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE |
| PROPRIETARY CHARACTERISTICS | MRCS |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE |
| SPECIFICATION/STANDARD DATA | 80205-NAS6805 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.413 INCHES MINIMUM AND 0.463 INCHES MAXIMUM |
| FASTENER LENGTH | 0.923 INCHES MINIMUM AND 0.953 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.156 INCHES MINIMUM AND 0.171 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.492 INCHES MINIMUM AND 0.502 INCHES MAXIMUM |
| SHOULDER DIAMETER | 0.3266 INCHES MINIMUM AND 0.3276 INCHES MAXIMUM FIRST SHOULDER |
| SHOULDER LENGTH | 0.490 INCHES MINIMUM AND 0.500 INCHES MAXIMUM FIRST SHOULDER |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| THREAD QUANTITY PER INCH | 24 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MINIMUM OVERALL |
| SHOULDER SHAPE | ROUND FIRST SHOULDER |
| MATERIAL | STEEL COMP E4340 OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416,TYPE 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6205 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| HEAD STYLE | C3 DISHED HEXAGON |
| SHOULDER DIAMETER | 0.3266 INCHES MINIMUM FIRST SHOULDER AND 0.3276 INCHES MAXIMUM |
| SHOULDER LENGTH | 0.490 INCHES MINIMUM FIRST SHOULDER AND 0.500 INCHES MAXIMUM |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MINIMUM |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE |
| PROPRIETARY CHARACTERISTICS | MRCS |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE |
| SPECIFICATION/STANDARD DATA | 80205-NAS6805 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| An externally threaded fastener whose threaded portion is of one nominal diameter, No. 1 ( .19 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 1 ( .19 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 1 ( .19 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW. |
