| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
| FASTENER LENGTH | 1.439 INCHES MINIMUM AND 1.469 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.246 INCHES MINIMUM FIRST HOLE AND 1.296 INCHES MAXIMUM FIRST HOLE |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6206 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.429 INCHES MINIMUM AND 0.479 INCHES MAXIMUM |
| FASTENER LENGTH | 1.439 INCHES MINIMUM AND 1.469 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM |
| GRIP DIAMETER | 0.3735 INCHES MINIMUM AND 0.3745 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.375 INCHES |
| GRIP LENGTH | 0.990 INCHES MINIMUM AND 1.010 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 24 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 1.246 INCHES MINIMUM FIRST HOLE AND 1.296 INCHES MAXIMUM FIRST HOLE |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-416 TY 2 CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6206 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
NAS6206-12
$0.00
NAS6206-11
$0.00
NAS6206-39
$0.00
NAS6206-24D
$0.00
NAS6206-9
$0.00