| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM |
| FASTENER LENGTH | 4.138 INCHES MINIMUM AND 4.168 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| GRIP LENGTH | 3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.945 INCHES MINIMUM FIRST HOLE AND 3.995 INCHES MAXIMUM FIRST HOLE |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6208 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.503 INCHES MINIMUM AND 0.553 INCHES MAXIMUM |
| FASTENER LENGTH | 4.138 INCHES MINIMUM AND 4.168 INCHES MAXIMUM |
| HEAD STYLE | DISHED HEXAGON |
| HEAD HEIGHT | 0.250 INCHES MINIMUM AND 0.265 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.741 INCHES MINIMUM AND 0.752 INCHES MAXIMUM |
| GRIP DIAMETER | 0.4985 INCHES MINIMUM AND 0.4995 INCHES MAXIMUM |
| SHANK UNTHREADED HOLE DIAMETER | 0.106 INCHES MINIMUM FIRST HOLE AND 0.116 INCHES MAXIMUM FIRST HOLE |
| NOMINAL THREAD DIAMETER | 0.500 INCHES |
| GRIP LENGTH | 3.615 INCHES MINIMUM AND 3.635 INCHES MAXIMUM |
| THREAD QUANTITY PER INCH | 20 |
| MINIMUM TENSILE STRENGTH | 160000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL |
| DISTANCE FROM HEAD LARGEST BEARING SURFACE TO SHANK HOLE CENTER | 3.945 INCHES MINIMUM FIRST HOLE AND 3.995 INCHES MAXIMUM FIRST HOLE |
| SURFACE FINISH | 32.0 MICROINCHES BEARING SURFACE OF HEAD |
| SURFACE FINISH | 32.0 MICROINCHES GRIP |
| SURFACE FINISH | 32.0 MICROINCHES THREADS |
| MATERIAL | STEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS 6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM OVERALL AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNJF |
| SPECIFICATION/STANDARD DATA | 80205-NAS6208 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD |
NAS6208-22
$0.00
NAS6208-16
$0.00
NAS6208-40D
$0.00
NAS6208-18
$0.00
NAS6208-16D
$0.00
NAS6208-33D
$0.00
NAS6208-445
$0.00
NAS1104-58D
$0.00
NAS1105-58D
$0.00