Part Number: NAS6606-14X

Alternate Part Number:
5306-01-306-6740

(No reviews yet) Write a Review
CONDITION:
NS
BOLT,SHOULDER,
NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE80205
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
FASTENER LENGTH1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
HEAD HEIGHT0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SHOULDER DIAMETER0.3891 INCHES MINIMUM FIRST SHOULDER AND 0.3901 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH0.865 INCHES MINIMUM FIRST SHOULDER AND 0.885 INCHES MAXIMUM FIRST SHOULDER
NOMINAL THREAD DIAMETER0.375 INCHES
THREAD QUANTITY PER INCH24
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
SHOULDER SHAPEROUND FIRST SHOULDER
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS6606 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
THREAD CLASS3A
THREAD DIRECTIONRIGHT-HAND
THREAD LENGTH0.553 INCHES MINIMUM AND 0.603 INCHES MAXIMUM
FASTENER LENGTH1.438 INCHES MINIMUM AND 1.468 INCHES MAXIMUM
HEAD STYLEDISHED HEXAGON
HEAD HEIGHT0.188 INCHES MINIMUM AND 0.203 INCHES MAXIMUM
WIDTH BETWEEN FLATS0.554 INCHES MINIMUM AND 0.564 INCHES MAXIMUM
SHOULDER DIAMETER0.3891 INCHES MINIMUM FIRST SHOULDER AND 0.3901 INCHES MAXIMUM FIRST SHOULDER
SHOULDER LENGTH0.865 INCHES MINIMUM FIRST SHOULDER AND 0.885 INCHES MAXIMUM FIRST SHOULDER
NOMINAL THREAD DIAMETER0.375 INCHES
THREAD QUANTITY PER INCH24
MINIMUM TENSILE STRENGTH160000 POUNDS PER SQUARE INCH
HARDNESS RATING36.0 ROCKWELL C MINIMUM OVERALL AND 40.0 ROCKWELL C MAXIMUM OVERALL
SHOULDER SHAPEROUND FIRST SHOULDER
MATERIALSTEEL COMP E4340 OVERALL OR STEEL COMP 8740 OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5000 MIL SPEC 1ST MATERIAL RESPONSE OVERALL OR MIL-S-6049 MIL SPEC 2ND MATERIAL RESPONSE OVERALL OR AMS6322 ASSN STD 2ND MATERIAL RESPONSE OVERALL
SURFACE TREATMENTCADMIUM OVERALL AND CHROMATE OVERALL
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TYPE 2,CLASS 2 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIES DESIGNATORUNJF
SPECIFICATION/STANDARD DATA80205-NAS6606 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
An externally threaded fastener whose threaded portion is of one nominal diameter, No. 1 ( .19 IN.) (5 mm) or larger. It has a round unthreaded neck or shank all or part of which is of greater diameter than the threaded portion. The head is not designed to be held or driven with an inserted drivers. A locking feature may be incorporated in the design of the head or threads. For items with a thread diameter smaller than No. 1 ( .19 IN.) (5 mm) and those items with an inserted drive head, use SCREW, SHOULDER. For items which are No. 1 ( .19 IN.) (5 mm) or larger in size and are both shouldered and have an externally relieved body, use BOLT, EXTERNALLY RELIEVED BODY. Excludes THUMBSCREW.