| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| GENERAL DYNAMICS EUROPEAN LAND SYSTEMS - MOWAG GMBH | S3002 |
| HYSTER-YALE GROUP, INC. | 30076 |
| CNH INDUSTRIAL AMERICA LLC | 10988 |
| BELLEFLEX TECHNOLOGIES, LLC | 6BHP8 |
| ROHR, INC | 51563 |
| DAF TRUCKS N.V. | H0001 |
| SIMPSON-LAWRENCE LTD JOHNSON AND EVI RUDE OUTBOARD MOTORS | U1621 |
| TIFFIN PARTS, L.L.C. | 13841 |
| CRANE PUMPS & SYSTEMS, INC. | 96046 |
| ELLIOTT MACHINE WORKS, INC. | 23834 |
| CUMMINS POWER GENERATION INC. | 44940 |
| HONEYWELL INTERNATIONAL INC. | 7187 |
| BRIGGS AND STRATTON CORP | 8645 |
| EAGLE COMPRESSORS, INC. | 57498 |
| AMERICAN SOCIETY OF MECHANICAL ENGINEERS | 5047 |
| TLD ACE CORPORATION | 365 |
| PIERCE CO INC THE SUB OF AVIS INDUSTRIAL CORP | 77260 |
| AM GENERAL LLC | 34623 |
| NATIONAL AEROSPACE STANDARDS COMMITTEE AEROSPACE INDUSTRIES ASSOCIATION OF AMERICA INC NOT FOR RFQ OR SOLICITATION USE | 80205 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.625 INCHES MINIMUM |
| FASTENER LENGTH | 0.750 INCHES NOMINAL |
| HEAD STYLE | HEXAGON |
| HEAD HEIGHT | 0.150 INCHES MINIMUM AND 0.163 INCHES MAXIMUM |
| WIDTH BETWEEN FLATS | 0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM |
| END ITEM IDENTIFICATION | 3990-01-444-6174 BITUM DISTRIBUTOR; MRAP - COUGAR TOW |
| NOMINAL THREAD DIAMETER | 0.250 INCHES |
| THREAD QUANTITY PER INCH | 20 |
| MINIMUM TENSILE STRENGTH | 120000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 23.0 ROCKWELL C MINIMUM AND 32.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | SAE GR 5 ASSN STD SINGLE MATERIAL RESPONSE OVERALL |
| SURFACE TREATMENT | CADMIUM AND CHROMATE OVERALL |
| SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | SAE/AMS QQ-P-416, TY2CL3 FED SPEC SINGLE TREATMENT RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNC |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE |
| NONDEFINITIVE SPEC/STD DATA | 2 TYPE AND 10P STYLE AND 5 GRADE |
| An externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. The threaded and unthreaded portions are both of the same nominal diameter of .19 inch (5 mm) or larger. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. The thread length being the controlled dimension, the grip length is not specified. A locking feature may be incorporated in the design of the head or threads. Excludes BOLT, MACHINE; BOLT, EXTERNALLY RELIEVED BODY; BOLT, INTERNAL WRENCHING; and SCREW, CAP, SOCKET HEAD. |
