| HONEYWELL INTERNATIONAL INC. | 70210 |
| ALLIEDSIGNAL INC DBA ALLIED-SIGNAL AEROSPACE CO | 72599 |
| AIRESEARCH AVIATION | 93570 |
| HONEYWELL INTERNATIONAL INC. | 99193 |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| HOLE DIAMETER | 0.475 INCHES MINIMUM AND 0.485 INCHES MAXIMUM |
| PERIPHERAL SHAPE STYLE | ROUND |
| CENTER HOLE SHAPE STYLE | ROUND |
| THICKNESS | 0.032 INCHES NOMINAL |
| OVERALL DIAMETER | 0.700 INCHES MINIMUM AND 0.720 INCHES MAXIMUM |
| MATERIAL | STEEL COMP 301 OVERALL OR STEEL COMP 302 OVERALL OR STEEL COMP 303 OVERALL OR STEEL COMP 316 OVERALL OR STEEL COMP 321 OVERALL |
| CROSS-SECTIONAL SHAPE STYLE | 1 RECTANGULAR |
| PERIPHERAL SHAPE STYLE | 1 ROUND |
| CENTER HOLE SHAPE STYLE | 1 ROUND |
| MATERIAL | STEEL COMP 301 OVERALL OR STEEL COMP 302 OR STEEL COMP 303 OR STEEL COMP 316 OR STEEL COMP 321 |
| PROPRIETARY CHARACTERISTICS | PACS |
| STYLE DESIGNATOR | 17C SOLID |
| A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch ( .8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be . 6 inches ( .15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be . 16 inches ( .4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items. |
