| NORTHROP GRUMMAN SYSTEMS CORPORATION | 4804 |
| NORTHROP GRUMMAN SYSTEMS CORPORATION | 4804 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| NIMIKKEISTOKESKUS NCB FINLAND | A486G |
| PICKARD AND BURNS INC | 89244 |
| THALES DEFENSE & SECURITY, INC. | 65597 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| ROCKWELL AUTOMATION, INC. | 1121 |
| SECTION QUANTITY | 1 |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III OVERALL LENGTH | 1.308 INCHES NOMINAL |
| TERMINAL LENGTH | 0.500 INCHES NOMINAL |
| III OVERALL HEIGHT | 0.815 INCHES NOMINAL |
| III OVERALL WIDTH | 0.190 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.093 INCHES NOMINAL |
| SHAFT DIAMETER | 0.115 INCHES NOMINAL |
| SHAFT LENGTH | 0.058 INCHES NOMINAL |
| BODY LENGTH | 1.250 INCHES NOMINAL |
| BODY WIDTH | 0.190 INCHES NOMINAL |
| BODY HEIGHT | 0.315 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| ACTUATOR TYPE | SINGLE SHAFT |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.700 INCHES NOMINAL |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 1.000 INCHES NOMINAL |
| MOUNTING FACILITY QUANTITY | 2 |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| MOUNTING METHOD | UNTHREADED HOLE |
| ELECTRICAL RESISTANCE PER SECTION | 10.0 KILOHMS SINGLE SECTION |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.300 INCHES NOMINAL |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -250.0 TO 250.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.75 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TEST DATA DOCUMENT | 81349-MIL-R-22097 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-22097/2 GOVERNMENT SPECIFICATION |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. |
