| HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS FORMER BENDIX NAVIGATION AND CONTROL SYSTEMS | 19315 |
| HONEYWELL INTL INC DEFENSE AVIONICS SYSTEMS | 55972 |
| BOURNS INSTRUMENTS INC | 80294 |
| BOURNS INSTRUMENTS INC | 80294 |
| LOCKHEED MARTIN CORP NAVAL ELECTRONICS & SURVEILLANCE SYSTEMS | 99971 |
| PARKER HANNIFIN LIMITED | U3675 |
| PARKER HANNIFIN LIMITED | U3675 |
| SECTION QUANTITY | 1 |
| BODY STYLE | RECTANGULAR |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III OVERALL LENGTH | 0.470 INCHES NOMINAL |
| TERMINAL LENGTH | 0.188 INCHES NOMINAL |
| III OVERALL HEIGHT | 0.250 INCHES NOMINAL |
| III OVERALL WIDTH | 0.170 INCHES NOMINAL |
| SHAFT DIAMETER | 0.070 INCHES NOMINAL |
| SHAFT LENGTH | 0.040 INCHES NOMINAL |
| BODY LENGTH | 0.250 INCHES MAXIMUM |
| BODY WIDTH | 0.170 INCHES NOMINAL |
| BODY HEIGHT | 0.250 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| ACTUATOR TYPE | SINGLE SHAFT |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 7920.0 NOMINAL |
| MAXIMUM STARTING TORQUE | 8.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 8.00 INCH-OUNCES |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| MOUNTING METHOD | TERMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 100.0 OHMS SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 7920.0 NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 175.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. |
