Part Number: 2122 352 00029

(No reviews yet) Write a Review
CONDITION:
NS
ALCATEL-LUCENT NETWORK SYSTEMSH0673
LOCKHEED MARTIN CORPORATION56232
DEPARTMENT OF DEFENSE PROJECT MANAGER-MOBILE ELECTRIC POWER30554
MILITARY STANDARDS PROMULGATED BY MILITARY DEPARTMENTS UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M96906
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M81349
SECTION QUANTITY1
BODY STYLECYLINDRICAL BUSHING MOUNTED
RELIABILITY INDICATORNOT ESTABLISHED
III OVERALL LENGTH1.312 INCHES MINIMUM AND 1.656 INCHES MAXIMUM
BODY DIAMETER1.032 INCHES MINIMUM AND 1.156 INCHES MAXIMUM
SHAFT DIAMETER0.248 INCHES MINIMUM AND 0.251 INCHES MAXIMUM
SHAFT LENGTH0.844 INCHES MINIMUM AND 0.906 INCHES MAXIMUM
MOUNTING BUSHING LENGTH0.360 INCHES MINIMUM AND 0.432 INCHES MAXIMUM
BODY LENGTH0.468 INCHES MINIMUM AND 0.750 INCHES MAXIMUM
III OVERALL DIAMETER1.515 INCHES MAXIMUM
SHAFT STYLEROUND, SLOTTED
ACTUATOR TYPESINGLE SHAFT
MAXIMUM STARTING TORQUE6.00 INCH-OUNCES
MAXIMUM STOP TORQUE128.00 INCH-OUNCES
NONTURN DEVICE LOCATIONAT 9 OCLOCK
NONTURN DEVICE RADIUS0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM
SCREW THREAD DIAMETER0.375 INCHES NOMINAL
SCREW THREAD SERIES DESIGNATORUNEF
SCREW THREAD QUANTITY PER INCH32
TERMINAL LOCATIONRADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE
MOUNTING METHODSHAFT AND STANDARD BUSHING
FEATURES PROVIDEDPANEL SEAL
ELECTRICAL RESISTANCE PER SECTION5.0 KILOHMS SINGLE SECTION
ROTARY ACTUATOR TRAVEL IN ANGULAR DEG309.0 MINIMUM AND 320.0 MAXIMUM
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER120.0 SINGLE SECTION
POWER DISSIPATION RATING PER SECTION IN WATTS2.0 FREE AIR SINGLE SECTION
RESISTANCE TOLERANCE PER SECTION IN PERCENT-10.0 TO 10.0 SINGLE SECTION
ACTUATOR TRAVEL CONTROL FEATURESTOPS
AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER70.0 SINGLE SECTION
TEST DATA DOCUMENT81349-MIL-R-94 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.).
TERMINAL TYPE AND QUANTITY3 TAB, SOLDER LUG
SPECIFICATION/STANDARD DATA81349-MIL-R-94/5 GOVERNMENT SPECIFICATION
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION.