| LOGETRONICS CORPORATION | 1205 |
| BOURNS INSTRUMENTS INC | 80294 |
| BOURNS, INC. | 32997 |
| ALLIED PRODUCTS CORPORATION DBA VERSON | 62945 |
| BOURNS INSTRUMENTS INC | 80294 |
| COAST GUARD YARD UPH | 4624 |
| ADATUM INC DIV AUSTRON | 24672 |
| BI TECHNOLOGIES CORPORATION | 73138 |
| SECTION QUANTITY | 1 |
| BODY STYLE | RECTANGULAR W/MOUNTING HOLES/SLOTS |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III OVERALL LENGTH | 1.060 INCHES NOMINAL |
| TERMINAL LENGTH | 0.200 INCHES NOMINAL |
| III OVERALL HEIGHT | 0.560 INCHES NOMINAL |
| III OVERALL WIDTH | 0.280 INCHES NOMINAL |
| MOUNTING HOLE DIAMETER | 0.088 INCHES MINIMUM |
| SHAFT DIAMETER | 0.100 INCHES NOMINAL |
| SHAFT LENGTH | 0.060 INCHES NOMINAL |
| BODY LENGTH | 1.000 INCHES NOMINAL |
| BODY WIDTH | 0.280 INCHES NOMINAL |
| BODY HEIGHT | 0.360 INCHES NOMINAL |
| SHAFT STYLE | ROUND, SLOTTED |
| ACTUATOR TYPE | SINGLE SHAFT |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.500 INCHES NOMINAL |
| LATERAL DISTANCE BETWEEN MOUNTING HOLE CENTERS | 0.830 INCHES NOMINAL |
| MOUNTING FACILITY QUANTITY | 2 |
| TERMINAL LOCATION | LOWER ADJACENT SIDE SINGLE ROW |
| MOUNTING METHOD | TERMINAL AND UNTHREADED HOLE |
| ELECTRICAL RESISTANCE PER SECTION | 5.000 KILOHMS SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 5400.0 NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.200 INCHES NOMINAL |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 85.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -10.0 TO 10.0 SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | CLUTCH |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 25.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus of minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, NONWIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND, PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. |
