| BOURNS INSTRUMENTS INC | 80294 |
| INTERLINK COMMUNICATIONS INC | 30890 |
| NAI TECHNOLOGIES INC | 7342 |
| NORTH ATLANTIC INDUSTRIES, INC. | 0VGU1 |
| THALES COMMUNICATIONS | F0053 |
| SECTION QUANTITY | 1 |
| BODY STYLE | RECTANGULAR |
| RELIABILITY INDICATOR | NOT ESTABLISHED |
| III OVERALL LENGTH | 0.260 INCHES MAXIMUM |
| TERMINAL LENGTH | 0.312 INCHES NOMINAL |
| III OVERALL HEIGHT | 0.672 INCHES NOMINAL |
| III OVERALL WIDTH | 0.290 INCHES NOMINAL |
| BODY LENGTH | 0.230 INCHES MINIMUM AND 0.260 INCHES MAXIMUM |
| BODY WIDTH | 0.280 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| BODY HEIGHT | 0.350 INCHES MINIMUM AND 0.370 INCHES MAXIMUM |
| SHAFT BEARING TYPE | SLEEVE |
| ACTUATOR TYPE | FLUSH DRIVE WITH SLOT-HOLE |
| EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 240.0 NOMINAL |
| MAXIMUM STARTING TORQUE | 5.00 INCH-OUNCES |
| MAXIMUM RUNNING TORQUE | 5.00 INCH-OUNCES |
| CENTER TO CENTER DISTANCE BETWEEN TERMINALS | 0.200 INCHES NOMINAL |
| TERMINAL LOCATION | LOWER ADJACENT SIDE TWO ROWS |
| MOUNTING METHOD | TERMINAL |
| CENTER TO CENTER DISTANCE BETWEEN TERMINAL ROWS | 0.100 INCHES NOMINAL |
| ELECTRICAL RESISTANCE PER SECTION | 100.000 KILOHMS SINGLE SECTION |
| ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 260.0 NOMINAL |
| CENTER TO CENTER DISTANCE BETWEEN CENTER TERMINAL AND OUTSIDE TERMINAL | 0.100 INCHES NOMINAL |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT ZERO PERCENT RATED POWER | 150.0 SINGLE SECTION |
| TEMP COEFFICIENT OF RESISTANCE PER SECTION IN PPM PER DEG CELSIUS | -100.0 TO 100.0 SINGLE SECTION |
| POWER DISSIPATION RATING PER SECTION IN WATTS | 0.5 FREE AIR SINGLE SECTION |
| RESISTANCE TOLERANCE PER SECTION IN PERCENT | -20.0 TO 20.0 SINGLE SECTION |
| ACTUATOR TRAVEL CONTROL FEATURE | STOPS |
| AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 85.0 SINGLE SECTION |
| TERMINAL TYPE AND QUANTITY | 3 PIN |
| A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. The functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. Specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. For items having manually positioned taps designed to be set and fixed prior to use, see RESISTOR, ADJUSTABLE. For items with step by step variation, see RHEOSTAT and RESISTOR, STEP BY STEP. For tandem-mounted items designed to function together as an attenuator (and rated accordingly), see ATTENUATOR, VARIABLE. Excludes RESISTOR (1), VARIABLE, WIRE WOUND, NONPRECISION; RESISTOR (1), VARIABLE, NONWIRE WOUND PRECISION; and RESISTOR (1), VARIABLE, WIRE WOUND, PRECISION. |
