| NORTHROP GRUMMAN SYSTEMS CORPORATION | 26916 |
| SPD ELECTRICAL SYSTEMS, INC | 30086 |
| SPD ELECTRICAL SYSTEMS, INC | 30086 |
| SPD ELECTRICAL SYSTEMS, INC | 30086 |
| SPD ELECTRICAL SYSTEMS, INC | 30086 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| MILITARY SPECIFICATIONS PROMULGATED BY MILITARY DEPARTMENTS/AGENCIES UNDER AUTHORITY OF DEFENSE STANDARDIZATION MANUAL 4120 3-M | 81349 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| VISHAY DALE ELECTRONICS, LLC | 91637 |
| TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -1 |
| III ELECTRICAL RESISTANCE | 182.000 OHMS |
| RESISTANCE TOLERANCE IN PERCENT | -1 |
| HEAT SINK MATERIAL | ALUMINUM ALLOY |
| HEAT SINK LENGTH | 7.000 INCHES |
| HEAT SINK WIDTH | 5.000 INCHES |
| HEAT SINK HEIGHT | 2.000 INCHES |
| HEAT SINK THICKNESS | 0.040 INCHES |
| AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25 |
| AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 275 |
| TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -0.2 |
| INCLOSURE METHOD | ENCASED |
| TERMINAL TYPE | TAB, SOLDER LUG |
| RELIABILITY INDICATOR | ESTABLISHED |
| RELIABILITY FAILURE RATE LEVEL IN PERCENT | 0.01 |
| TERMINAL LENGTH | 0.438 INCHES NOMINAL |
| BODY LENGTH | 1.938 INCHES NOMINAL |
| BODY WIDTH | 0.594 INCHES NOMINAL |
| BODY HEIGHT | 0.625 INCHES NOMINAL |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY LENGTH | 1.562 INCHES NOMINAL |
| POWER DISSIPATION RATING IN WATTS | 10.000 FREE AIR |
| DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | 0.844 INCHES NOMINAL |
| TERMINAL WIDTH | 0.140 INCHES MINIMUM |
| MOUNTING HOLE SIZE | 0.125 INCHES NOMINAL |
| STYLE DESIGNATOR | AXIAL TERMINAL (S) |
| TEST DATA DOCUMENT | 81349-MIL-R-39009 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-R-39009/1 GOVERNMENT SPECIFICATION |
| INC 374 3 REINSTATED ON 1 3 3~A resistor whose ohmic value cannot be adjusted or varied. The resistance element consists of high resistance wire (or ribbon) either wound on an insulated form or constructed so as to be self-supporting. The item must have inherent characteristics of inducing self-inductance. Opposition to current flow is an inherent property of the resistance wire and is manifested by the heat dissipation in the resistor. Excludes SUPPRESSOR, IGNITION INTERFERENCE. See also RESISTOR (1), FIXED, WIRE WOUND, NONINDUCTIVE. |
