NUT,PLAIN,HEXAGON,
| GENERAL MOTORS CORP | 24617 |
| MTU AMERICA INC. | 72582 |
| GENERAL MOTORS LLC | 7X677 |
| ALLIS-CHALMERS CORP | 92392 |
| TEREX CORP | 97907 |
| TEREX EQUIPMENT LTD | K4285 |
| E.C.A ETABLISSEMENT CENTRALD'APPROVISIONNEMENT DES FORCES ARMEE | SCY13 |
| FEDERAL SPECIFICATIONS PROMULGATED BY GENERAL SERVICES ADMINISTRATION WASHINGTON DC | 81348 |
| KORODY-COLYER CORP A CR INDUSTRIES CO | 18954 |
| POWER COMPONENTS (DEUTSCHLAND) GMBH | C7432 |
| THREAD CLASS | 3B |
| THREAD DIRECTION | RIGHT-HAND |
| NUT STYLE | HEXAGON |
| NUT HEIGHT | 0.706 INCHES MINIMUM AND 0.731 INCHES MAXIMUM |
| WIDTH ACROSS FLATS | 0.922 INCHES MINIMUM AND 0.937 INCHES MAXIMUM |
| THREAD SERIES | UNF |
| THREAD QUANTITY PER INCH | 18 |
| HARDNESS RATING | 103.0 BRINELL STANDARD MINIMUM |
| NOMINAL THREAD SIZE | 0.625 INCHES |
| COUNTERSINK ANGLE | 90.0 DEGREES NOMINAL NUT |
| BEARING SURFACE TYPE | CHAMFERED OR WASHER FACED |
| MATERIAL | STEEL OVERALL |
| NONDEFINITIVE SPEC/STD DATA | B GROUP AND 2 TYPE AND 1 STYLE |
| DEPARTURE FROM CITED DESIGNATOR | AS MODIFIED BY QUANTITY OF DRILLED HOLES |
| MATERIAL | STEEL, MIL-S-5059 |
| SUPPLEMENTARY FEATURES | CROSS-SECTIONAL SHAPE STYLE:NO.195 IRREGULAR SHAPE FROM FIIG A03200 |
| A nut, flat on top and bottom having 6 flat sides. For items which have internal tapered or straight (parallel) pipe threads, specific electrical conduit size designation, and which when installed, provide a method of tightening to lock the connection, see LOCKNUT, ELECTRICAL CONDUIT. See also LOCKNUT, TUBE FITTING. For items having a thickness (or height) exceeding two times the width across the flats, use POST, ELECTRICAL-MECHANICAL EQUIPMENT. (When height or thickness and/or width across the flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance.) |
0