BOLT,MACHINE,
| GENERAL MOTORS CORP | 24617 |
| MTU AMERICA INC. | 72582 |
| GENERAL MOTORS LLC | 7X677 |
| H20 TANK INC U S MOTORS DIV | 80072 |
| POWER COMPONENTS (DEUTSCHLAND) GMBH | C7432 |
| THREAD CLASS | 3A |
| THREAD DIRECTION | RIGHT-HAND |
| THREAD LENGTH | 0.562 INCHES MINIMUM |
| FASTENER LENGTH | 1.938 INCHES NOMINAL |
| HEAD STYLE | HEXAGON |
| HEAD HEIGHT | 0.234 INCHES NOMINAL |
| WIDTH BETWEEN FLATS | 0.500 INCHES NOMINAL |
| NOMINAL THREAD DIAMETER | 0.312 INCHES |
| GRIP LENGTH | 1.438 INCHES NOMINAL |
| FEATURES PROVIDED | FINISHED HEAD |
| THREAD QUANTITY PER INCH | 24 |
| MINIMUM TENSILE STRENGTH | 130000 POUNDS PER SQUARE INCH |
| HARDNESS RATING | 28.0 ROCKWELL C MINIMUM OVERALL AND 34.0 ROCKWELL C MAXIMUM OVERALL |
| MATERIAL | STEEL OVERALL |
| MATERIAL DOCUMENT AND CLASSIFICATION | GM 290M FSCM 73342 MFR REF SINGLE MATERIAL RESPONSE OVERALL |
| THREAD SERIES DESIGNATOR | UNF |
| An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. The threaded and unthreaded portions are both of one nominal diameter of .19 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. Head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. For items having a grip length portion machined to a tolerance of . 15 inch ( . 38 mm) or less, BOLT, SHEAR. See also SCREW, CAP, HEXAGON HEAD and SCREW, MACHINE. |
0